High-Temperature Maintenance Tips for Small Rotary Drilling RigsIn the daily use of small rotary drilling rigs, it is common for the internal temperature of the equipment to rise. To learn more about the maintenance tips for small rotary drilling rigs, please check out our previously published. To ensure the long-term stable operation of the machine and avoid various problems caused by high temperatures, the following are some detailed maintenance tips:
Use professional coolant
Many people use water as a coolant to save money. However, water reacts with other substances within the equipment during circulation to form scale. The scale will hinder the normal operation of the cooling system, which will lead to a decrease in heat dissipation and ultimately cause the equipment to overheat. Therefore, it is recommended that a professional coolant be used. Professional coolant can not only effectively reduce the temperature of the machine, but also prevent the formation of scale, thus maintaining the good performance of the cooling system.
Regular cleaning of the cooling system
Hydraulic oil radiators, screen water radiator blades, and other components in the process easily accumulate dust and debris, which will affect the cooling effect. It is very important to clean these parts regularly. You can use a high-pressure water gun or compressed air to remove debris from the surface of the radiator and ensure an unobstructed flow of the cooling system. Regular maintenance not only improves cooling efficiency but also extends the life of the unit.
Replacement of coolant
When the coolant is found to be dirty or lose its effectiveness, it needs to be replaced in time. The steps for replacing the coolant are as follows: First, park the machine in a flat area and wait for the engine to cool down completely. Then, open the radiator cap and carefully unscrew the drain valve at the bottom of the radiator to release the old coolant. Next, flush the tank thoroughly with water to remove any old coolant and impurities that may be left behind. Finally, close the drain valve and add fresh coolant. Changing the coolant regularly will help maintain the normal temperature of your equipment and prevent overheating.
Pay Attention to Machine Cleanliness
The cleanliness of your equipment is critical to preventing heat problems. Regularly check the filter outside of the tank to make sure it is not clogged with debris. If the filter is clogged, it will result in less effective heat dissipation and increase the risk of the machine overheating. Use a water gun or other tool to clean out the debris. Especially in working environments with poor water quality, add some antifreeze, which not only helps lower the temperature of the machine but also prevents the coolant from freezing and ensures that the machine operates properly in different environments.
Summarize
Maintaining the high temperature of small rotary drilling rigs can not only improve the working efficiency of the equipment but also avoid equipment failure caused by overheating. Regularly checking and maintaining the cooling system, using professional coolant, replacing the coolant as well as keeping the machine clean are all key measures to ensure the stable operation of the equipment. Through these maintenance measures, the service life of the equipment can be effectively extended, reducing unnecessary failures and economic losses.