R14070N0M01 Drive Wheel for Piling Machine

R14070N0M01 Drive Wheel for Piling Machine

Product Description：

Product Name：Sprocket
Product Information：Drilling Rig Undercarriage Parts
Material：40Mn2;35SiMn;ZGSCSiMn2H
Warranty time：1 years/2500 working days
MOQ：1 pcs
Delivery Time：15-25days after payment
Payment Term：TT;LC;Negotiate

Advanced casting technology:

Yantai Orient uses a casting process for the sprocket to achieve complex shapes and designs, ensuring dimensional accuracy. At the same time, the strength and wear resistance of the Drive gear are improved through the casting process, allowing the sprocket drive to withstand greater loads and resist longer wear. The casting process also ensures tumbler drive consistency and quality stability, meaning each Drive Wheel’s performance is predictable. At the same time, casting can provide higher structural stability, reduce the risk of deformation and damage of the sprocket during use, increase the service life, and reduce the time loss of the project.

Advanced heat treatment technology:

The driving wheel rubs against geological materials for a long time and requires high hardness and high wear resistance. Our heat treatment technology increases the hardness of the sprocket surface, improves its anti-wear performance, and extends its service life. At the same time, heat treatment can also improve the strength and toughness of the sprocket drive, and increase its mechanical properties such as tensile resistance, compression resistance, and bending resistance. This enables the Drive gear to withstand greater workloads and impact loads of the filing machine, improving reliability.

Drilling rig undercarriage maintenance:

1. When stopping work in a short period of time, a small amount of compressed air should be given to prevent sediment from invading the inside of the drilling rig impactor. If the drilling rig operation is stopped for a long time, the impactor should be raised 1-2 meters away from the bottom of the hole and fixed.
2. Always check the lubricating oil condition of the wind motor.
3. When the working surface is immersed in water, use a large-diameter drill bit when opening the hole and insert the drill pipe so that the drill pipe is 1-2 meters above the water surface to prevent mud and rock slag from falling into the hole.
4. No reversal is allowed during drilling operations to prevent the drill pipe from falling into the hole;
5. Always check the water and gas pipelines of the crawler drilling rig to see if the bolts and nuts of each accessory are tight.